Icon Indicating Helpful HintFor new installations refer to the Installation Guide located on SpecsIntact's Web Help Center.

 

This command allows SpecsIntact to search your system for all the Masters you have available to you, and display them by name and location on your system.


Icon Indicating How To StepsHow To Connect Masters:

  1. Select Setup, choose Connect Masters
  2. When the Connect Masters dialog box appears, check the Master(s) required
  3. Next to the Primary Master select the , choose UFGS
  4. Select OK

 

If Multiple Working Directories are used, Masters may be in a different location and may not appear on the list as illustrated above.

 

Icon Indicating How To StepsHow To Connect Masters Not Located In A Connected Working Directory:

  1. Select Setup, choose Connect Masters
  2. Connect Masters dialog box appears, select Scan (illustrated above)
  3. From the Browse for Directory dialog box, choose the Drive by selecting the
  4. Below Directories, double-click until you reach the desired folder
  5. Select OK
  6. The Connect Masters dialog box will open, check the Masters located in the browsed directory
  7. Select OK

 

Icon Indicating CautionIf Masters are listed with the same name but separate paths, make sure to unselect the old path first, the select the Masters on the correct path.