HEADLINES...
SpecsIntact
v4.3.0.835 Is Here !
|
|
|
|
|
|
Check
here often for information on the most recent developments
in SpecsIntact and what to expect in the future.
 |
Click
the link at the left to join our automatic notification
list and receive an email when important new information
is posted on this site. |
News
Briefs
June
3, 2008
NASA
hosted the first Joint Agency UFGS Working Group Meeting,
made up of representatives from NASA, NAVFAC and USACE,
The meeting was held in Las Vegas, NV in conjunction with
the 2008 Construct Conference. The
Board convenes regularly to review requests for changes
in the software and set the priorities and direction for
the design of the system. See
the UFGS
Working Group Meeting Minutes.
May
28, 2008
SpecsIntact
4.3.0.835 was released by the development team for download.
Read more about the exciting new enhancements in the Release
Notes that can be found in the web site's Knowledge
Base.
April 7,
2008
Today
the SpecsIntact Development Team released a software patch
correcting the problem that sometimes occurred where revisions
tend to bleed over on text that was not redlined, although
while viewing Revisions through the SpecsIntact Editor
the Revisions were correct. This issue only occurred during
Printing and Publishing. If you use Revisions, we highly
recommend downloading and installing this patch.
January
3, 2008
Today
the SpecsIntact Development Team made the decision to retract
SpecsIntact v4.3.0.821. This decision was made due to a
recently discovered issue where Jobs containing Revisions
did not print correctly. The revisions tend to bleed over
on text that is not redlined, although while viewing Revisions
through the SpecsIntact Editor the Revisions are correct.
This issue only occurs during Printing and Publishing.
If you use Revisions, we highly recommend downloading and
reinstalling the previous version of SpecsIntact v4.2.0.785.
We
apologize for any inconvenience this may have caused. We
will notify you as soon as an updated version is available.
|
|
| |
|
Updated:
July 8, 2008
|
|
SpecsIntact
is
a software product
of the National Aeronautics and Space Administration (NASA), and is developed and maintained under the Joint Base Operations and Support Contract (J-BOSC) at the Kennedy Space Center. All
other products mentioned are registered trademarks or trademarks
of their respective companies.
SpecsIntact, Kennedy Space Center, FL 32899
Technical Support line - (321) 867- 8800, Fax - (321) 867- 1444
Email - KSC-SpecsIntact@nasa.gov
Web
Site Curator:
Cheryl Fitz-Simon
NASA
Official Responsible: Miguel Morales
If
you have questions, problems or comments regarding this web site,
email:
Cheryl Fitz-Simon
|
|
 |
